GC Maxpro OSD-1207

Description

Directions for use

Oil Spills at Sea

GC Maxpro OSD-1207 is used undiluted by direct spraying to clean up oil spills at sea. Allow some time for the oil to absorb the GC Maxpro OSD-1207 and then disperse mixture by vigorous agitation using fire hoses, the ship’s propeller, breaker boards towed behind work boats, etc. GC Maxpro OSD-1207 should not be used in an area of sea of a depth less than 20 metres .

Oil on Beaches and Shore Line

GC Maxpro OSD-1207 should be applied neat by spraying over oiled areas. Allow time for the oil to absorb the GC Maxpro OSD-1207 then follow by washing down the beach or rocks, etc. The treatment rate depends on the type and thickness of the oil spill, also on the age and condition. Under conditions where it is a thin slick of oil, 1 litre of GC Maxpro OSD-1207 is enough to treat approximately 10 square metres of oil. In many cases, several applications may be necessary.

Oil Spill on Deck

Remove as much of the oil as possible, then spray GC Maxpro OSD-1207 over area covered by the oil and allow some time for it to be absorbed. Disperse the mixture with water by means of a fire hose. Depending on type of oil it may be necessary to use several applications

Transportation | Storage | Handling

Not regulated for Transportation & Storage
Handling – Refer to warning label on containers. Normal precautions for industrial chemicals apply.

Characteristics of GCM – OSD 1207

• Easy to apply
  • Biodegradable
  • Environmental friendly
  • Non flammable
  • Free of dangerous chemicals
  • No regulations on transport and storage